Electronic Inkometer

This machine is used for measuring viscosity and misting of ink on the printing press. It measures the torque required for shearing the ink between metal roller and rubber roller. This inkometer is composed of metal roller rotating at a specified circumferential speed, top roller driven on it, and swing frame supporting the top roller shaft. At first, the metal roller is rotated without ink on it, which makes the top roller in contact with the metal roller, rotate by frictional force acting on the contact surface, producing initial torque on the swing frame. It is the torque in idle operation without ink. Then, the roll is rotated with ink on it. The frame receives additional force due to ink tacking. Torque in this state expresses the ink tack.

参考規格 :

[JIS]K-5701-2000

Specifications

Top roller	79.3mm in outer diameter, 156mm in effective length, NBR hardness JIS 50°±2°	Metal roller	76.2mm in outer diameter, 152.4mm effective length, made of bronze
Kneading roller	50.8mm in outer diameter, 184mm in effective length, NBR hardness JIS 50°±2° stroke 30mm	Rotation speed of metal roller	0 to 3,000rpm, low speed for initial kneading about 120rpm
Tack measurement	by load cell, the detected force is converted and displayed as tack value	Measurement range	0 to 50g･m
Up-and-down of top roller	simple operation with push button	Optional	constant temperature water tank, recorder
Accessories	ink pipette (capacity 2cc, minimum increment 0.01cc), calibration weight (calibration range max. 35g・m)	Power souce	three-phase 200/220VAC 50/60Hz 10A
Outer dimentions	0 to 50g･m	Instrument weight	168kg

To address the creation of new products that trend seek

Coat/Calender/Print / Inko meter

Product Number No.2281

Specifications

Product introduction

Product Search