To address the creation of new products that trend seek

• No.2529
• [JIS]
• [TAPPI]
• [ISO]

This machine disintegrates the pulp into single fibers, by rotating the pulp with water at a high speed. This disintegration method is specified by JIS and ISO. Its applicable range is wide: paper sheet making, preparation of specimen for measurement of freeness, bleaching and screening. The rotation speed can be changed as desired. It is used for operation in a condition different from disintegration specified by the standard.

• No.2531
• [JIS]
• [TAPPI]
• [ISO]

This machine is used in the same manner as the standard pulp disintegrator. It is suitable for disintegration of a relatively large amount of specimen. It is indispensable for pre-treatment for paper sheet making.

• No.2531L30
• [JIS]
• [TAPPI]
• [ISO]

Since the slurry is discharged through the port in the container bottom, it is not necessary to place and remove the container, facilitating operation.

• No.2532
• [JIS]P-8220-1998
• [TAPPI]T205om-88
• [ISO]5263

This machine disintegrates the pulp into single fibers, by rotating the pulp with water at a high speed. This disintegration method is specified by JIS and ISO. Its applicable range is wide: paper sheet making, preparation of specimen for measurement of freeness,　beating, bleaching and screening.

• No.2534
• [JIS]
• [TAPPI]
• [ISO]

This is a small type simulating the pulper used in the paper mill. It rapidly disintegrates pulp and waste paper. For effectively circulating slurry and giving shear force, the impeller is placed on the bottom, thereby shortening disintegration time and reducing power cost.

• No.2525
• [JIS]
• [TAPPI]
• [ISO]

The chest is usually used for storage and blending of specimens. With the chest, you can adjust the quantitative and qualitative adjustments such as pH conditioning in the paper making sequence.

• No.2535-I
• [JIS]
• [TAPPI]T-430
• [ISO]

This machine efficiently disintegrates the material into flocs, maintaining the air in dried state, without exerting adverse effects on the specimen due to temperature rise and cutting of fibers. Machine configuration: the material is broken and impacted between protrusions on the disc that rotates at a high speed and saw teeth on the casing inside, to be changed into flocs.

• No.2535-II
• [JIS]
• [TAPPI]
• [ISO]

This machine has been developed for rapidly disintegrating wet pulp (concentration 20 to 30%). Machine configuration: the material is charged into special agitating impellers that rotate at a high speed; then the pulp is disintegrated at an instant and discharged from the lower port. Both dry pulp and wet pulp can be processed, remaining less grains. Since the specimen tank can be removed, efficient measurement can be made.

• No.2536
• [JIS]
• [TAPPI]
• [ISO]

This machine dehydrates paper stock by centrifugal force. All the sections in contact with liquid are made of stainless steel (SUS-304). The basket is well balanced, free of vibration, so it operates very silently. With permanently lubricated bearings, maintenance is very easy. The brake is applied by pulling the lever.

• No.2537
• [JIS]
• [TAPPI]
• [ISO]

This machine rapidly dehydrates pulp slurry. Unique suspended design completely offsets unbalance in rotation. Low noise of rotation. The brake immediately stops the operation.