To address the creation of new products that trend seek

• No.2612
• [JIS]
• [TAPPI]
• [ISO]

This autoclave is used in a range of chemical experiments as well as for cooking of various wood chips. It is designed to allow reactions to take place adequately and uniformly even with a very low liquid ratio, providing an advantage that allows experiments under conditions close to the site conditions. In addition, in an effort to control environmental problems, it is widely used in studies of oxygen bleaching and oxygen digestion.

• No.2613
• [JIS]
• [TAPPI]
• [ISO]

This device aims to enhance safety and ease operations before and after a chip digestion test, such as preparing chips into the cooking chamber and taking them out upon completion. Chips can be fed into the chamber as it is erected. After cooking, the lid is removed and the autoclave is inverted using the handle for easy retrieval of digested pulp.

• No.2615
• [JIS]
• [TAPPI]
• [ISO]

Like the horizontal type rotating autoclave, this cooker also performs efficient cooking tests on various types of chips. Its advantage lies in that the chamber body rotates slowly in a vertical direction, achieving quick and even permeation of the cooking liquid into chips. It consists of a chamber, rotating system and electric heater. The chamber is provided with a pressure gauge, safety valve, thermal sensor, needle valve, etc. Temperature is automatically controlled.

• No.2625
• [JIS]
• [TAPPI]
• [ISO]

This equipment is used for refining digested pulp and measuring knots. The mechanism gives vibration to digested pulp placed inside the screen box through the bottom screen resting on the rubber diaphragm, sucks them toward the screen plate and discharges them, alternately repeating, promoting passage of digested fibers and sifting through good-quality pulp.

• No.2625
• [JIS]
• [TAPPI]
• [ISO]

This equipment is used for refining digested pulp and measuring knots. The mechanism gives vibration to digested pulp placed inside the screen box through the bottom screen resting on the rubber diaphragm, sucks them toward the screen plate and discharges them, alternately repeating, promoting passage of digested fibers and sifting through good-quality pulp.

• No.2626
• [JIS]
• [TAPPI]UM-242
• [ISO]

This screen is used for measurement of the content of chunky fibers in GP or MP. With MP, chunky fibers may cause a problem in the paper machine's plate section or during the drying process. Structurally, this equipment is similar to the No.2625. The difference is that this screen is provided with an injection nozzle at the center of the screen, through which clean water is flashed at a certain pressure onto the plates of the screen box, preventing clogging of the plate grooves and achieving superior screening.