Large size rotary dryer

  • Pulp/Chip/Sheet former / Dryer
  • Product Number No.2576

This dryer dries wet mats in a Yankee dryer-like manner by holding the mats with canvas. It works well when continuously drying a large volume of sheets. To make it easy to mount wet paper onto the conveyor belt, it is designed to allow paper feed from the front side. The rotation of the cylindrical drum can be changed to allow adjustment of the drying time as desired. It also enables polishing of the paper being dried through the mechanism in which paper sheets are pressed against the rotating drum of the squeeze roll when a pressure up to 500N/cm is applied on the rotating drum. With this dryer, it is also easy to replace the canvas as you can disengage the fastener at the joint section. After completing operation, the electrical circuit is automatically disconnected when a certain length of time has elapsed.

参考規格 :

Specifications

Dryer drum 800mm in diameter, 350mm wide
SUS-304 hard-chrome plated, mirror finished
Temperature range room temperature to 180℃
Heating electric, three-phse 200VAC 9kW, far infrared heater Temperature controller non-contact surface thermometer
Conveying speed 0.2 to 5m/min. steplessly variable Conbeyor belt heat resistant canvas (endless)
Squeeze roll linear pressure 100 to 500N/cm, with air cylinder Motor three-phase 200/220VAC 0.2kW
Outer dimentions 700×1,300×1,600mm Instrument weight 410kg

同じカテゴリーの商品

Experimental gate roll coater

Experimental gate roll coater

製品番号:No.2219

KRK sym-size press

KRK sym-size press

製品番号:No.2220

High speed coater (with dryer)

High speed coater (with dryer)

製品番号:No.2223

Coating rod

Coating rod

製品番号:No.2225

Product introduction

Product Search

Numbers and standard Search

Numbers and standard Search

IOS standard Search

JIS standard Search

TAPPI standard Search