Static coefficient of friction tester

The coefficient of friction on paper surface is one characteristic that provides a measurement for evaluating the paper surface condition. This tester helps easy measurement of the coefficient of static friction. It works as follows.
A specimen is attached onto each of the inclined driving plate and the traveling weight. As the inclined driving plate gradually increases the inclination, the weight travels at a point where the inclination exceeds the limit of the friction range of the specimen. At that point, the sensor detects the motion and stops the inclined plate immediately. The coefficient of static friction is calculated from that inclination. As the scale markings represent values of the inclination (θ) converted into tanθ, you can directly read the value of the coefficient of static friction (μ).

参考規格 :

[JIS]P-8147-1994
[TAPPI]T-815om-01

Specifications

Measurement range	scale of static friction coefficent 0 to 1.500 （minimum increment 0.005） sliding angle scale 0 to 55°（minimum increment 0.5°）	Inclined plate speed	8mm/sec. in measurement, 16mm/sec. in return
Specimen size	specimen A: 120×250mm （maximum） specimen B: 60×150mm （contact surface）	Travelling weight	total 1,000g
Power souce	100/110VAC 50/60Hz 1A	Outer dimentions	470×290×410mm
Instrument weight	16kg

To address the creation of new products that trend seek

Physical testing / Friction

Product Number No.2088

Specifications

Product introduction

Product Search