Gravure printability tester (monochrome printing)

Needs for gravure printing have been increasing recently, with rapidly advancement of its technology. This tester has been developed under the guidance of the National Printing Bureau, to have functions similar to those of the practical press. Printing conditions can be set as desired, such as printing pressure, speed, contact angle and contact pressure of the doctor blade. This machine is composed of impression cylinder, plate cylinder, doctor section, ink vat and driving unit. Ink applied on the plate cylinder in the ink vat is scraped off by the doctor. The plate cylinder contacts the impression cylinder on which the specimen is wound, thereby transferring the ink to the specimen under a constant pressure to complete printing.
Referential standard: J.TAPPI No.24-2000

参考規格 :

Gravure printability tester (monochrome printing)

Specifications

Printing speed	0.23 to 2.0m/sec.	Printing pressure	100 to 1,000N/cm
Printing area	35mm wide, 350mm long	Plate cylinder	180mm in diameter×50mm wide
Impression cylinder	180mm in diameter×50mm wide （effective width 40mm）	Doctor	for gravure printing, contact angle and pressure adjustable
Printing speed meter	digital display, circumferential speed directly readable	Reference	Proceedings o the Japanese Society of Printing Science and Technology, Vol. 10, No. 1, Takahashi, Koyama and Masaki "Ink trnsfer in gravure printing"
Power souce	three-phase 200/220VAC 50/60Hz	Outer dimentions	720×530×590mm
Instrument weight	for gravure printing, contact angle and pressure adjustable

To address the creation of new products that trend seek

Coat/Calender/Print / Printability

Product Number No.2270

Specifications

Product introduction

Product Search