To address the creation of new products that trend seek

• No.2100-I
• [JIS]
• [TAPPI]T-809om-99
• [ISO]

When using corrugated board for packaging material, structural quality study includes checking of characteristics such as flat crush strength, end crush strength, ply bond strength and corrugated medium strength. This tester is developed as a pre-processing device for collecting samples for testing those characteristics. It can form specimens as wide as 100mm.
It works in the following mechanism. On a corrugating machine, pre-heated corrugating medium is threaded through corrugating rolls (gear-shaped) heated to 177±5?C under a certain pressure, during which process corrugation is performed. The specimen formed is fixed in a rack using a ten-pin cantilever apparatus and then attached to the rack with double-faced adhesive tape to form one-sided corrugated board. A crush tester is used to compress the specimen and then the maximum load is measured.
J.TAPPI No.29-2000

• No.2100-II
• [JIS]
• [TAPPI]
• [ISO]7263-1994

This tester is developed as a pre-processing device for collecting samples for CMT testing. It works in the following mechanism. On a corrugating machine, pre-heated corrugating medium is threaded through corrugating rolls(gear-shaped) heated to 177±5℃ under a certain pressure,during which process corrugation is performed.The specimen formed is fixed in a rack using a ten-pin cantilever apparatus and then attached to the rack with adhesive tape to from one-sided corrugated board.