Taber stiffness tester (automatic type)

Stiffness is one of important parameters for assessing the appropriateness of material for processing and printing. There are nearly proportional relationships between stiffness and beating degree, basis weight, thickness and water content. The correlation is remarkable especially with thickness. As with the No.2048-M, one end of the specimen (paper, paperboard, plastic sheet, metal foil, etc.) is held, and around the held point, the specimen is turned slowly, thereby being given flexural loads. The loading point (rotation angle) is read by a sensor when the deflection angle is 15 degrees, to calculate and output stiffness.

参考規格 :

[JIS]P-8125-2000
[TAPPI]T489os-99
[ISO]2493

Specifications

Specimen	30 to 40mm wide （typically 38mm）, 70mm long, up to 3.2mm thick	Measurement range	0 to 10（g・cm） 0 to 100（g・cm）（standard） 0 to 500（g・cm） 0 to 1,000（g・cm） 0 to 2,000（g・cm）
Bending speed	180°±40°/min.	Stiffness data	left, right, average
Switching display	SI unit (N) and gram unit (g) selectable	Power souce	100/110VAC 50/60Hz 1A
Outer dimentions	300×320×440mm	Instrument weight	13kg