To address the creation of new products that trend seek

• No.2546
• [JIS]P-8222-1998
• [TAPPI]T205om-88
• [ISO]Jan-69

This machine rapidly dewaters the paper sheet after couching, which was made by the sheet machine. Machine configuration: by the movement of the pump piston, glycerin pushes upward the floating pressure plate via the rubber diaphragm in the press, to apply a pressure to the specimen. The upper disc of the press is supported by two columns, facilitating handling of the sheet. This upper disc can be easily moved upward.

• No.2569
• [JIS]
• [TAPPI]
• [ISO]

The conventional process of manual press operation requires operator attendance all through the process, creating a challenge for labor saving in the handmade paper adjustment process. This press eliminates the disadvantage by introducing automatic opration with higher workability contributing to labor saving in the process significantly. When in operation, the pressure plate is operated to raise and lower the plate by air diaphragm. It is automatically performing the press process according to ISO standard. The first stage press gradually compresses the specimen in takes about 20 seconds for pressure to rise from zero to 410kPa and holds 410kPa for 5minutes. The second stage press rapidly compresses the specimen, holds 410kPa for 2minutes and then automatically release pressure.

• No.2569
• [JIS]
• [TAPPI]
• [ISO]

The conventional process of manual press operation requires operator attendance all through the process, creating a challenge for labor saving in the handmade paper adjustment process. This press eliminates the disadvantage by introducing automatic opration with higher workability contributing to labor saving in the process significantly. When in operation, the pressure plate is operated to raise and lower the plate by air diaphragm. It is automatically performing the press process according to ISO standard. The first stage press gradually compresses the specimen in takes about 20 seconds for pressure to rise from zero to 410kPa and holds 410kPa for 5minutes. The second stage press rapidly compresses the specimen, holds 410kPa for 2minutes and then automatically release pressure.

• No.2570-A
• [JIS]
• [TAPPI]
• [ISO]

This press couches and squeezes water out of paper sheets produced on a sheet machine. A plunger-type pump is employed, which sends stored glycerin to the rubber diaphragm at the press section when the pump handle is operated. The diaphragm then pushes up the lower pressure board to compress the specimen. Improvement has been made with the stability while applying pressure to achieve squeezing with a higher pressure.

• No.2570-B
• [JIS]
• [TAPPI]
• [ISO]

This press couches and squeezes water out of paper sheets produced on a sheet machine. A plunger-type pump is employed, which sends stored glycerin to the rubber diaphragm at the press section when the pump handle is operated. The diaphragm then pushes up the lower pressure board to compress the specimen. Improvement has been made with the stability while applying pressure to achieve squeezing with a higher pressure.

• No.2571
• [JIS]
• [TAPPI]
• [ISO]

This automatic press use air pressure for press sheet. This press keeps the pressure while papers are pressed.